\documentclass[11pt,a4paper]{article}
\usepackage[margin=25mm]{geometry}
\usepackage{amsmath,fontspec,unicode-math,array,longtable}
\setmainfont{Nimbus Roman}
\setmonofont{Nimbus Mono PS}
\setmathfont{MTPro2Math.otf}[Path=../out/]
% Use upright letters from the active math font for named operators.
\setoperatorfont{\symup}
% Named versions are used only to print alternatives on successive rows.
% A user's document normally selects its features once with setmathfont.
\setmathfont{MTPro2Math.otf}[Path=../out/,version=swash,
  RawFeature={+cv01}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=greekalt,
  RawFeature={+cv02,+cv03}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=betaonly,
  RawFeature={+cv02}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=deltaonly,
  RawFeature={+cv03}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=planckalt,
  RawFeature={+cv04}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=curly,
  RawFeature={+ss01}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=scriptalt,
  RawFeature={+ss02}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=curlytwo,
  RawFeature={+ss03}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=curlyalt,
  RawFeature={+ss01,+ss02}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=frakturalt,
  RawFeature={+ss04}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=heavy,
  RawFeature={+ss05}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=holey,
  RawFeature={+ss06}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=heavyholey,
  RawFeature={+ss05,+ss06}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=andalt,
  RawFeature={+cv05}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=slantedops,
  RawFeature={+ss07}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=straight,
  RawFeature={+cv06}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=largeparen,
  RawFeature={+cv07}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=largecurly,
  RawFeature={+cv08}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=plainhbrace,
  RawFeature={cv09=1}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=curlyhbrace,
  RawFeature={cv09=2}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=subsetalt,
  RawFeature={+cv10}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=orderalt,
  RawFeature={+cv11}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=negone,
  RawFeature={cv12=1,cv13=1}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=negtwo,
  RawFeature={cv12=2,cv13=2}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=negmixed,
  RawFeature={cv12=1,cv13=2}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=nsimalt,
  RawFeature={+cv14}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=curverel,
  RawFeature={+cv15,+cv16}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=proptoonly,
  RawFeature={+cv15}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=smileonly,
  RawFeature={+cv16}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=shortrel,
  RawFeature={+ss08}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=thickrel,
  RawFeature={+ss09}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=emptyalt,
  RawFeature={+cv17}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=marksalt,
  RawFeature={+cv18,+cv19}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=yenonly,
  RawFeature={+cv18}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=registeredonly,
  RawFeature={+cv19}]
\setmathfont{MTPro2Math.otf}[Path=../out/,version=cardsalt,
  RawFeature={+ss10}]
\usepackage[hidelinks,pdftitle={MTPro2 Math: Font guide},
  pdfauthor={}]{hyperref}
\setlength{\parindent}{0pt}
\setlength{\parskip}{5pt}
\setlength{\tabcolsep}{7pt}
\renewcommand{\arraystretch}{1.28}
\emergencystretch=2em
\clubpenalty=10000
\widowpenalty=10000
\newcommand{\codesize}{\fontsize{10.5pt}{12pt}\selectfont}
% Verbatim, so that no space follows a command name.
\NewDocumentCommand{\code}{v}{{\codesize\texttt{#1}}}
\AddToHook{env/verbatim/begin}{\codesize}
\newcommand{\sample}[2]{\begingroup\mathversion{#1}$#2$\endgroup}
\newcommand{\bbline}{\symbb{ABGMXYZ\;abcxyz\;0123456789}}
\newcommand{\bbgreek}{\BbbGamma\;\BbbPi\;\Bbbgamma\;\Bbbpi}
\newcommand{\bbitalic}{\mitBbbD\;\mitBbbd\;\mitBbbe\;\mitBbbi\;\mitBbbj}
\newcommand{\scriptline}{\symscr{CGILQSYZrz}}
\newcommand{\boldscriptline}{\symbfscr{CGILQSYZrz}}
\newcommand{\matrixsample}{\left(\begin{matrix}
  2&-1&0&0\\
  -1&2&-1&0\\
  0&-1&2&-1\\
  0&0&-1&2
\end{matrix}\right)}
\newcommand{\tentfunction}{\Lambda(x)=\left\{\begin{aligned}
  1+x,&\quad -1\leq x<0,\\
  1-x,&\quad 0\leq x\leq1,\\
  0,&\quad \text{otherwise}.
\end{aligned}\right.}
% Helpers below arrange specimens; they are not a font interface.
% U+00AE has no named unicode-math command; select the math family explicitly.
\newcommand{\registeredmark}{\Umathchar 0 \symoperators "00AE\relax}
\newcommand{\smallbrace}{\left\{\frac{1}{n}:n\in\symbb{N}\right\}}
\newcommand{\bracepair}{\overbrace{a+b+c}^{s}\quad\underbrace{x+y+z}_{t}}
\newcommand{\operatorsample}{\displaystyle
  \sum_{k=1}^{n}a_k\quad\prod_{k=1}^{n}b_k\quad\coprod_{i\in I}X_i}
\newcommand{\andsample}{p\wedge q\quad\displaystyle\bigwedge_{i=1}^{n}P_i}
\newcommand{\negatedsample}{a\nleq b\quad a\ngeq b\quad
  A\nsubseteq B\quad A\nsupseteq B}

\begin{document}

{\LARGE MTPro2 Math}\par
{\large Font guide}\hfill v1.7\par
\medskip
Use the generated font with LuaLaTeX and \code{unicode-math}:
\begin{verbatim}
\usepackage{unicode-math}
\setmathfont{MTPro2Math.otf}
\end{verbatim}
Use \code{MTPro2MathLite.otf} for Lite. The examples in this guide use Full.
No \code{mtpro2.sty} is needed. If the font is not installed, give its
directory with the \code{Path} option, as in \code{[Path=../out/]}.
Use LuaTeX's default font processing, not \code{Renderer=HarfBuzz}.
Word is described in Section~\ref{sec:word}; building the fonts in
\code{mtp2otf.pdf}. The font can also be used with
\code{lua-unicode-math}.

\section{Letters and Greek}
Ordinary letters are mathematical italic. Use \code{\symup},
\code{\symit}, \code{\symbfup} and \code{\symbfit} to select a
mathematical alphabet explicitly:
\begin{center}
\begin{tabular}{@{}ll@{}}
\code{\symup{ABGMXYZabcxyz}} & $\symup{ABGMXYZabcxyz}$\\
\code{\symit{ABGMXYZabcxyz}} & $\symit{ABGMXYZabcxyz}$\\
\code{\symbfup{ABGMXYZabcxyz}} & $\symbfup{ABGMXYZabcxyz}$\\
\code{\symbfit{ABGMXYZabcxyz}} & $\symbfit{ABGMXYZabcxyz}$\\
\end{tabular}
\end{center}
The \code{\sym...} commands use the math font rather than the document's
text font. Bold italic requires Full. For Greek, the same selectors give
$\symup{\alpha\beta\Gamma\Omega}$,
$\symit{\alpha\beta\Gamma\Omega}$,
$\symbfup{\alpha\beta\Gamma\Omega}$ and
$\symbfit{\alpha\beta\Gamma\Omega}$.

For letters in subscripts, these math-font selectors also retain access
to the font's script-positioning data. A text-font selection such as
\code{\mathrm} may use a different font and prevent LuaTeX from using
that data. See Section~\ref{sec:differences} for this and other
engine-dependent limits.

Character variants (cv) select local letter or symbol forms; stylistic
sets (ss) select related designs across a group of characters. Both can
be selected for the whole document.
For example, swash z is selected in the preamble:
\begin{verbatim}
\setmathfont{MTPro2Math.otf}[RawFeature={+cv01}]
\end{verbatim}
\begin{center}
\begin{tabular}{@{}lll@{}}
Default & \sample{normal}{z\quad\symbfit{z}} & swash z\\
\code{cv01} & \sample{swash}{z\quad\symbfit{z}} & \\[5pt]
Default & \sample{normal}{\symup{\beta\delta}\quad\symit{\beta\delta}\quad
  \symbfup{\beta\delta}\quad\symbfit{\beta\delta}} & beta, delta\\
\code{cv02,cv03} & \sample{greekalt}{\symup{\beta\delta}\quad\symit{\beta\delta}\quad
  \symbfup{\beta\delta}\quad\symbfit{\beta\delta}} & \\[5pt]
Default & \sample{normal}{\hbar} & Planck sign\\
\code{cv04} & \sample{planckalt}{\hbar} & \\
\end{tabular}
\end{center}
These choices are available in both editions; their bold counterparts
require Full. Under \code{unicode-math}, \code{\hbar} and
\code{\hslash} name the same character, whose design is selected by
\code{cv04}.

Beta and delta are independent: \code{cv02} changes beta, and
\code{cv03} changes delta. The row above enables both.
Features can be combined: \code{RawFeature={+cv01,+cv02}} selects swash z
and alternate beta while leaving delta unchanged.
For a feature with numbered choices, use, for example,
\code{RawFeature={cv09=2}}. Omit a feature to keep its default design.

\newpage
\section{Script and Fraktur}
These alphabets are available in Full. Use \code{\symscr} and \code{\symbfscr} for regular and bold Script.
\code{ss01} selects Curly Script. \code{ss02} changes selected letters
in regular and bold Script, including alternatives in the Curly family.
\code{ss03} selects the alternate Curly series directly.

\begin{center}
\code{\symscr{CGILQSYZrz}}\par\smallskip
\begin{tabular}{@{}ll@{}}
Default & \sample{normal}{\scriptline}\\
\code{ss01} & \sample{curly}{\scriptline}\\
\code{ss02} & \sample{scriptalt}{\scriptline}\\
\code{ss03} & \sample{curlytwo}{\scriptline}\\
\code{ss01,ss02} & \sample{curlyalt}{\scriptline}\\
\end{tabular}
\end{center}
\begin{verbatim}
\setmathfont{MTPro2Math.otf}[RawFeature={+ss01,+ss02}]
\end{verbatim}
\code{ss03} takes precedence over the other regular Script choices.
It matches \code{ss01,ss02} for regular Script, but does not itself enable
bold Script alternatives. Curly G/M/N/Q/Y also have alternatives under
\code{ss02}.
The Curly selectors affect regular Script; bold Script retains its own
design, with its alternatives controlled by \code{ss02}.

\begin{center}
\code{\symbfscr{CGILQSYZrz}}\par\smallskip
\begin{tabular}{@{}ll@{}}
Default & \sample{normal}{\boldscriptline}\\
\code{ss02} & \sample{scriptalt}{\boldscriptline}\\
\end{tabular}
\end{center}

Fraktur is selected with \code{\symfrak} or \code{\symbffrak}.
Its alternatives use \code{ss04}, independently of the Script choices.

\begin{center}
\begin{tabular}{@{}lll@{}}
 & \code{\symfrak{IRYxy}} & \code{\symbffrak{IRYxy}}\\
Default & \sample{normal}{\symfrak{IRYxy}}
  & \sample{normal}{\symbffrak{IRYxy}}\\
\code{ss04} & \sample{frakturalt}{\symfrak{IRYxy}}
  & \sample{frakturalt}{\symbffrak{IRYxy}}\\
\end{tabular}
\end{center}
\begin{verbatim}
\setmathfont{MTPro2Math.otf}[RawFeature={+ss02,+ss04}]
\end{verbatim}

\newpage
\section{Blackboard}
Blackboard is available in Full. Use \code{\symbb{...}} for double-struck letters and digits.
The default design and three upright alternatives are shown below.

\begin{center}
\code{\symbb{ABGMXYZ\;abcxyz\;0123456789}}\par\smallskip
\begin{tabular}{@{}ll@{}}
Default & \sample{normal}{\bbline}\\
\code{ss05} & \sample{heavy}{\bbline}\\
\code{ss06} & \sample{holey}{\bbline}\\
\code{ss05,ss06} & \sample{heavyholey}{\bbline}\\
\end{tabular}
\end{center}
\code{ss05} selects heavier upright letters. \code{ss06} selects the
Holey Roman family; combine them for its heavier upright design.
For example:
\begin{verbatim}
\setmathfont{MTPro2Math.otf}[RawFeature={+ss05,+ss06}]
\end{verbatim}

Four Greek characters and five italic characters have standard Unicode
inputs. \code{ss06} changes these to the corresponding Holey designs;
\code{ss05} leaves them unchanged.

\begin{center}
\begin{tabular}{@{}lll@{}}
 & Greek & Italic\\
Default & \sample{normal}{\bbgreek} & \sample{normal}{\bbitalic}\\
\code{ss06} & \sample{holey}{\bbgreek} & \sample{holey}{\bbitalic}\\
\end{tabular}
\end{center}
\begin{verbatim}
\BbbGamma \BbbPi \Bbbgamma \Bbbpi
\mitBbbD \mitBbbd \mitBbbe \mitBbbi \mitBbbj
\end{verbatim}
The italic Blackboard selection is limited to these five characters.

\newpage
\section{Operators and formula sizes}
To use the math font's upright letters for named operators such as
\code{\sin} and \code{\cos}, set:
\begin{verbatim}
\setoperatorfont{\symup}
\end{verbatim}
Large operators have ordinary text and display designs. The math
style selects them automatically; \code{\limits} and \code{\nolimits} control the
placement of limits.
\[
  \textstyle\sum_{k=1}^{n}a_k\quad\int_0^1 f(x)\,dx
  \qquad\displaystyle\sum_{k=1}^{n}a_k\quad\int_0^1 f(x)\,dx
\]
\code{cv05} changes the three optical designs of \code{\wedge}
and the large operator \code{\bigwedge} at every supported size:
\begin{center}
\begin{tabular}{@{}ll@{}}
Default & \sample{normal}{\andsample}\\[9pt]
\code{cv05} & \sample{andalt}{\andsample}\\
\end{tabular}
\end{center}
\code{ss07} selects slanted sums, products and coproducts at every supported size.
\begin{center}
\begin{tabular}{@{}ll@{}}
Default & \sample{normal}{\operatorsample}\\[9pt]
\code{ss07} & \sample{slantedops}{\operatorsample}\\
\end{tabular}
\end{center}
\begin{verbatim}
\setmathfont{MTPro2Math.otf}[RawFeature={+ss07}]
\end{verbatim}
Both operator features are available in Full and Lite. The features select
design families; the engine's size request selects a stage within a family.
Other operators retain their own designs:
\[
  \bigcap_{i=1}^{n}A_i\qquad\bigcup_{i=1}^{n}A_i
  \qquad\bigotimes_{i=1}^{n}V_i\qquad\oint_C\vec{F}\cdot d\vec{r}
\]
The original package's extra-large operator commands are not provided.
Use a size request as described below instead.

\newpage
\subsection*{Requesting a larger operator}
With ordinary \code{unicode-math} input, a tall fraction after \code{\int}
does not enlarge the integral sign. To select a larger design in LuaLaTeX,
set \code{\Umathoperatorsize} for the required math style:
\begin{verbatim}
\begingroup
\Umathoperatorsize\displaystyle=3em
\[
  \int_0^1 \frac{1}{1+\frac{x}{1+x^2}}\,dx
\]
\endgroup
\end{verbatim}
\begin{center}
\begin{tabular}{@{}cc@{}}
Ordinary display & Requested size \code{3em} \\[10pt]
$\displaystyle\int_0^1\frac{1}{1+\frac{x}{1+x^2}}\,dx$
& \begingroup\Umathoperatorsize\displaystyle=3em
$\displaystyle\int_0^1\frac{1}{1+\frac{x}{1+x^2}}\,dx$\endgroup
\\
\end{tabular}
\end{center}
The value is a size request, not a scale factor: the engine chooses from
the font's ready-made designs. It does not continuously stretch the glyph.
The group limits the setting to this example. Within the group, the setting
also applies to other operators in display style, such as \code{\sum} and
\code{\prod}. Stylistic sets such as \code{ss07} choose the design
family independently of the size request.

Larger designs are available in both Full and Lite. The growing symbols
are listed in \code{mtp2otf.pdf}. The command above is specific to
LuaTeX; Word controls operator growth through its own equation settings.


\subsection*{Scripts, fractions and radicals}
Subscripts and superscripts select the source's optical sizes automatically:
\[
  x+\alpha\qquad 2^{x+\alpha}\qquad 2^{2^{x+\alpha}}
\]
Radicals and fractions use the ordinary commands:
\begin{verbatim}
\sqrt{\frac{a^2+b^2}{c^2+d^2}} \qquad \sqrt[3]{x+y}
\end{verbatim}
\[
  \sqrt{\frac{a^2+b^2}{c^2+d^2}}\qquad\sqrt[3]{x+y}
\]

\newpage
\section{Parentheses and braces}
Use \code{\left} and \code{\right} to size delimiters to a formula.
The default series uses the original ordinary growth range, followed by
an assembly of repeatable parts. The default braces use the morphed
design, which approaches the assembled shape as it grows.

\code{cv07} extends parentheses through the large ready-made designs.
The two examples below use the same input and font size.

\begin{center}
\begin{tabular}{@{}ll@{}}
Default & \sample{normal}{\matrixsample}\\[10pt]
\code{cv07} & \sample{largeparen}{\matrixsample}\\
\end{tabular}
\end{center}
\begin{verbatim}
\setmathfont{MTPro2Math.otf}[RawFeature={+cv07}]
\end{verbatim}

For braces, \code{cv06} selects straight braces with the ordinary growth
range. \code{cv08} selects Curly braces with an extended ready-made range.

At larger sizes the default and straight series use the same assembly.
Each row shows a small set and a larger piecewise function:
\begin{center}
\begin{tabular}{@{}lll@{}}
Default & \sample{normal}{\smallbrace}
  & \sample{normal}{\tentfunction}\\[10pt]
\code{cv06} & \sample{straight}{\smallbrace}
  & \sample{straight}{\tentfunction}\\[10pt]
\code{cv08} & \sample{largecurly}{\smallbrace}
  & \sample{largecurly}{\tentfunction}\\
\end{tabular}
\end{center}
\begin{verbatim}
\setmathfont{MTPro2Math.otf}[RawFeature={+cv07,+cv08}]
\end{verbatim}
Use paired delimiters, or end with \code{\right.} for a one-sided brace:
\begin{verbatim}
\left( ... \right)     \left\{ ... \right\}
\left\{ ... \right.
\end{verbatim}

The large series continues through very large ready-made sizes before
the ordinary assembly. \code{cv06} takes precedence over \code{cv08}; choose one brace
style. Parenthesis selection remains independent.

\newpage
\section{Accents and horizontal braces}
Use a fixed accent for a letter and a wide accent for a group. These
constructions are available in both editions.
\begin{center}
\begin{tabular}{@{}ll@{}}
\code{\hat{x}, \widehat{ABC}} & $\hat{x}\quad\widehat{ABC}$\\[2pt]
\code{\tilde{x}, \widetilde{ABC}} & $\tilde{x}\quad\widetilde{ABC}$\\[2pt]
\code{\check{x}, \widecheck{ABC}} & $\check{x}\quad\widecheck{ABC}$\\[2pt]
\code{\bar{M}, \wideoverbar{M+N}} & $\bar{M}\quad\wideoverbar{M+N}$\\[2pt]
\code{\vec{v}, \overrightarrow{AB}} & $\vec{v}\quad\overrightarrow{AB}$\\[2pt]
\code{\overleftarrow{AB}} & $\overleftarrow{AB}$\\[2pt]
\code{\dot{x}, \ddot{x}, \hat{i}} & $\dot{x}\quad\ddot{x}\quad\hat{i}$\\
\end{tabular}
\end{center}
\code{\bar} and \code{\overbar} select the fixed accent;
\code{\wideoverbar} selects the stretching accent.
\code{\overline} draws a rule instead. An operator such as
$\hat{H}$ uses the ordinary \code{\hat{H}}.

Horizontal parentheses and braces cover their contents. For example:
\begin{verbatim}
\overparen{AB} \qquad \underbrace{V\times\cdots\times V}_{n}
\end{verbatim}
\[
  \overparen{AB}\qquad\underbrace{V\times\cdots\times V}_{n}
\]
\code{cv09} selects the design of both overbraces and underbraces:
\begin{center}
\begin{tabular}{@{}ll@{}}
Default & \sample{normal}{\bracepair}\\[10pt]
\code{cv09=1}: plain & \sample{plainhbrace}{\bracepair}\\[10pt]
\code{cv09=2}: Curly & \sample{curlyhbrace}{\bracepair}\\
\end{tabular}
\end{center}
\begin{verbatim}
\setmathfont{MTPro2Math.otf}[RawFeature={cv09=2}]
\end{verbatim}
This choice is independent of the vertical-brace features. Use:
\begin{verbatim}
\overbrace{...}^{...}     \underbrace{...}_{...}
\end{verbatim}

\newpage
\section{Relations}
The following Full-edition features change relation designs without
changing their input commands or mathematical meanings.
\begin{center}
\begin{tabular}{@{}lll@{}}
Default & \sample{normal}{\subsetneq\;\supsetneq\;\subsetneqq\;\supsetneqq} & \\
\code{cv10} & \sample{subsetalt}{\subsetneq\;\supsetneq\;\subsetneqq\;\supsetneqq}
  & \code{\subsetneq \supsetneq}\\
 & & \code{\subsetneqq \supsetneqq}\\[5pt]
Default & \sample{normal}{\lneqq\;\gneqq} & \\
\code{cv11} & \sample{orderalt}{\lneqq\;\gneqq}
  & \code{\lneqq \gneqq}\\[5pt]
\end{tabular}
\end{center}
Negated comparisons use \code{cv12}; negated inclusions use \code{cv13}.
Each independently accepts 0 (off), 1 (first alternative) or 2 (double
equality). Value 1 selects slanted equality for comparisons and the AMS
alternate for inclusions. Use their direct commands:
\begin{verbatim}
a\nleq b \quad a\ngeq b \quad A\nsubseteq B \quad A\nsupseteq B
\end{verbatim}
\begin{center}
\begin{tabular}{@{}ll@{}}
Default & \sample{normal}{\negatedsample}\\[4pt]
\code{cv12=1,cv13=1} & \sample{negone}{\negatedsample}\\[4pt]
\code{cv12=2,cv13=2} & \sample{negtwo}{\negatedsample}\\
\end{tabular}
\end{center}
The not-similar sign is independent:
\begin{center}
\begin{tabular}{@{}lll@{}}
Default & \sample{normal}{a\nsim b} & \code{a\nsim b}\\
\code{cv14} & \sample{nsimalt}{a\nsim b} & \\
\end{tabular}
\end{center}
\begin{verbatim}
\setmathfont{MTPro2Math.otf}[RawFeature={cv12=1,cv13=1,+cv14}]
\end{verbatim}

\code{cv15} selects the proportional-to form; \code{cv16} selects smile
and frown. They can be enabled independently.
\begin{center}
\begin{tabular}{@{}lll@{}}
Default & \sample{normal}{\propto\;\smile\;\frown} & \\
\code{cv15,cv16} & \sample{curverel}{\propto\;\smile\;\frown}
  & \code{\propto \smile \frown}\\
\end{tabular}
\end{center}
\code{ss08} selects shorter relation bars; it does not change the
delimiter bars in \code{\left|x\right|} or
\code{\left\Vert v\right\Vert}. \code{ss09} selects thicker
similarity and approximation signs.
\begin{center}
\begin{tabular}{@{}lll@{}}
Default & \sample{normal}{\mid\;\nmid\;\parallel\;\nparallel} & \\
\code{ss08} & \sample{shortrel}{\mid\;\nmid\;\parallel\;\nparallel}
  & \code{\mid \nmid \parallel \nparallel}\\[5pt]
Default & \sample{normal}{\sim\;\approx} & \\
\code{ss09} & \sample{thickrel}{\sim\;\approx}
  & \code{\sim \approx}\\
\end{tabular}
\end{center}

\newpage
\section{Other symbols}
\code{cv17} selects the alternative empty-set sign in Full.
\code{\emptyset} and \code{\varnothing} refer to the same Unicode
character under \code{unicode-math}.
\begin{center}
\begin{tabular}{@{}lll@{}}
Default & \sample{normal}{\emptyset} & \code{\emptyset}\\
\code{cv17} & \sample{emptyalt}{\emptyset} & \\[5pt]
Default & \sample{normal}{\mathyen\;\registeredmark}
  & \code{\mathyen}, U+00AE\\
\code{cv18,cv19} & \sample{marksalt}{\mathyen\;\registeredmark} & \\[5pt]
Default & \sample{normal}{\spadesuit\;\clubsuit}
  & \code{\spadesuit \clubsuit}\\
\code{ss10} & \sample{cardsalt}{\spadesuit\;\clubsuit} & \\
\end{tabular}
\end{center}
\code{cv18} changes yen and \code{cv19} changes the registered sign in Full;
they are independent. \code{ss10} gives shaded spades and clubs in both editions.

The usual symbol commands include \code{\ell}, \code{\partial},
\code{\nabla}, \code{\infty}, \code{\dagger} and \code{\ddagger}:
\[
  \ell\qquad\partial\qquad\nabla\qquad\infty\qquad\dagger\qquad\ddagger
\]
Upright Latin letters, including accented letters such as \code{é},
come from the Roman font chosen at build time (by default Nimbus Roman).
In math, \code{\symup{é}} selects them. A character without a math
command can be entered as \code{\Umathchar 0 \symoperators "00E9\relax}.

Mathematical sans-serif and monospace alphabets, a complete bold-symbol
version, and a compatibility package for MTPro2-specific macros are
not included.

\newpage
\section{Combining features}
These features can be selected independently.
Each example keeps the other symbol at its default unless explicitly enabled.
\begin{center}
\begin{tabular}{@{}ll@{}}
Default & \sample{normal}{\beta+\delta}\\
\code{cv02} & \sample{betaonly}{\beta+\delta}\\
\code{cv03} & \sample{deltaonly}{\beta+\delta}\\[6pt]
Default & \sample{normal}{\negatedsample}\\
\code{cv12=1,cv13=2} & \sample{negmixed}{\negatedsample}\\[6pt]
Default & \sample{normal}{a\propto b\quad x\smile y\quad x\frown y}\\
\code{cv15} & \sample{proptoonly}{a\propto b\quad x\smile y\quad x\frown y}\\
\code{cv16} & \sample{smileonly}{a\propto b\quad x\smile y\quad x\frown y}\\[6pt]
Default & \sample{normal}{\mathyen\quad\registeredmark}\\
\code{cv18} & \sample{yenonly}{\mathyen\quad\registeredmark}\\
\code{cv19} & \sample{registeredonly}{\mathyen\quad\registeredmark}\\[6pt]
\end{tabular}
\end{center}
\begin{verbatim}
\setmathfont{MTPro2Math.otf}[RawFeature={cv12=1,cv13=2}]
\end{verbatim}

\newpage
\section{Microsoft Word}\label{sec:word}
Install the TTF and choose it as the equation font, as described in
Word's own documentation. Word lists the font as \code{MTPro2 Math} or
\code{MTPro2 Math Lite}. Do not use the OTF in Word: it declares a much
larger clipping area, with which Word fails, for example when saving as
PDF.

For the equation text, enable \emph{Kerning for fonts} at 1~pt and above
in the Font dialog. Otherwise letters are set without the font's pair
kerning. Ordinary mathematical characters include the source italic
correction in their advances, so their spacing does not depend on Word
adding it between letters.

Use Word's equation editor for alphabets, accents, delimiters and
operators. Word does not let you choose character variants or stylistic
sets, so equations use the default designs. For this reason the default
braces are the morphed design, which grows most smoothly.

\section{Differences from MTPro2 with pdf\LaTeX}\label{sec:differences}
The font follows the Type~1 fonts and \code{mtpro2.sty} as closely as
OpenType MATH allows. These differences remain:
\begin{itemize}
\item OpenType MATH has fewer script shifts than \TeX. Superscripts in
  display style, and subscripts without a superscript, are set lower.
\item One math axis serves all sizes. In script and scriptscript style,
  fraction bars and delimiter centers are slightly below the minus and
  equals signs.
\item In script sizes, accents over bases lower than the x-height are
  set lower. Accents follow the outline of the base rather than its
  \TeX\ box, so they are higher over letters that extend beyond the box,
  such as italic A.
\item Wide accents grow from the fixed accent, which is used over narrow
  bases; in scripts they are reduced with the script size.
\item Limits of display operators such as \code{\sum} and \code{\prod}
  are closer to the operator.
\item Some delimiter sizes differ slightly; \code{\dbinom} uses a
  smaller parenthesis.
\item LuaTeX does not apply pair kerning in script and scriptscript
  style. LuaTeX can omit the subscript kern when a subscript starts with
  a fraction, radical or explicit box, and a narrow subscript can widen
  the completed formula. An ordinary letter turned into an operator with
  \code{\mathop} loses its limit correction.
\end{itemize}

\section{License}
The fonts contain the outlines of the MathTime Professional~2 fonts,
\textcopyright\ Publish or Perish, Inc. They are an unofficial conversion
for the licensee's own use. Like the Type~1 fonts, they may be embedded in
documents for transfer, display and printout; the font files themselves
must not be redistributed. mtp2otf and this guide are under the BSD Zero
Clause License. MathTime is a trademark of Publish or Perish, Inc.

\end{document}
